Draytek Vigor2762 series, User Manual

Page: 577 / 651

Telnet Command:
Telnet Command:
srv nat dmz
srv nat dmz
This command allows users to set DMZ host. Before using this command, please set WAN IP
Alias first.
Srv nat dmz n m [-<command> <parameter> | … ]
Syntax Description
Syntax Description
Parameter Description
n It means to map selected WAN IP to certain host.
1: wan1
2: wan2
m It means the index number of the DMZ host.
Default setting is “1” (WAN 1). It is only available for Static IP
mode. If you use other mode, you can set 1 ~ 8 in this field. If WAN
IP alias has been configured, then the number of DMZ host can be
added more.
[<command>
<parameter>|…]
The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-e It means to enable/disable such feature.
1:enable
0:disable
-i It means to specify the private IP address of the DMZ host.
-r It means to remove DMZ host setting.
-v It means to display current status.
Example
Example
> srv nat dmz 1 1 -i 192.168.1.96
> srv nat dmz -v
% WAN1 DMZ mapping status:
Index Status WAN1 aux IP Private IP
----------------------------------------------------
1 Disable 0.0.0.0 192.168.1.96
Telnet Command:
Telnet Command:
srv nat ipsecpass
srv nat ipsecpass
This command allows users to enable or disable IPSec ESP tunnel passthrough and IKE source
port (500) preservation.
Srv nat ipsecpass [options]
Syntax Description Syntax Description
Parameter Description
[options] The available commands with parameters are listed below.
on It means to enable IPSec ESP tunnel passthrough and IKE source
port (500) preservation.
off It means to disable IPSec ESP tunnel passthrough and IKE source
port (500) preservation.
status It means to display current status for checking.
Example
Example
Vigor2762 Series User’s Guide 567