Draytek Vigor2762 series, User Manual

Page: 503 / 651

Syntax Description
Syntax Description
Parameter Description
req_opt It means option-request.
LAN|WAN1|WAN2|iface# It means to specify LAN or WAN interface for such address.
[<command>
<parameter>|…]
The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-a It means to show current DHCPv6 status.
-s It means to ask the SIP.
-S It means to ask the SIP name.
-d It means to ask the DNS setting.
-D It means to ask the DNS name.
-n It means to ask NTP.
-i It means to ask NIS.
-I It means to ask NIS name.
-p It means to ask NISP.
-P It means to ask NISP name.
-b It means to ask BCMCS.
-B It means to ask BCMCS name.
-r It means to ask refresh time.
Parameter 1: the parameter related to the request will be displayed.
0: the parameter related to the request will not be displayed.
Example
Example
> ip6 dhcp req_opt WAN2 -S 1
> ip6 dhcp req_opt WAN2 -r 1
> ip6 dhcp req_opt WAN2 -a
% Interface WAN2 is set to request following DHCPv6 options:
% sip name
>
Telnet Command: Telnet Command: ip6 dhcp client ip6 dhcp client
This command allows you to use DHCPv6 protocol to obtain IPv6 address from server.
ip6 dhcp client [WAN1|WAN2|iface#] [-<command> <parameter>| ... ]
Syntax Description
Syntax Description
Parameter Description
client It means the dhcp client settings.
[<command>
<parameter>|…] The available commands with parameters are listed below.
[…] means that you can type in several commands in one line.
-a It means to show current DHCPv6 status.
-p [IAID] It means to request identity association ID for Prefix Delegation.
-n [IAID] It means to request identity association ID for Non-temporary
Address.
-c [parameter] It means to send rapid commit to server.
Vigor2762 Series User’s Guide 493