Douwe Egberts Cafitesse 100, Service Manual

Page: 30 / 210

2 - 16
Installation / Putting into Operation Service Manual Cafitesse 100
07.2004
Fig. 10
7
• Turn the thermostat regulator (7) clockwise
up to the stop, to the maximum
temperature of 95 °C (171 °F). (Fig. 10)
• Ensure that the dispenser heats up and is
switched off. (Low temperature indicator (8)
extinguishes.). (Fig. 11)
• In this case switch off the main switch (9)
of the dispenser, and disconnect the power
supply plug (Fig. 11).
• Mount the back panel, the air duct and the
housing cover with the cooling compartment
lid.
• Remove the foil from the front cover and
the splash panel.
• Insert the advertising panel and the front
cover (10/11). (Fig. 11)
CAUTION: When the front cover is made
of glass, there is the danger of
being injured due to incorrect
handling or breaking of the
glass.
• Degrease the housing wall thoroughly at
which the card holder (12) is to be
installed. (Fig. 11)
• For degreasing, it is recommended to use a
mixture of 50% isopropanol and 50% water.
• Mount the card holder (12) to the
dispenser. (Fig. 11)
• Insert the documents into the card holder.
CAUTION: The last page of the Quick
Reference card (Cleaning Report)
has to be copied, has to be filled
in by the trained Cleaning Perso-
nal and has to be filed up.
• Connect the power supply plug again.
• Switch the dispenser on at the main switch
(9). (Fig. 11)
• Programme the dispenser in accordance
with the customer's demands (see chap. 4).
Factory settings: see chap. 4.
STOP
xxxxx
xxxxx
POWER
OFF
ON
ON
OFF
Fig. 11
10/
11
8
9
12