Douwe Egberts Cafitesse 100, Service Manual, Page: 132 / 210

07.2004
5A - 50
Functions - Water System Service Manual Cafitesse 100
• Mount the air duct.
• Mount the housing cover .
CAUTION: Make sure to connect the
ground connection to the
housing cover.
• Guide the plug connections S05/A (1) of
the main cable harness (former dry running
protection), S03/2 and S03/3 (2) of the
cable harness switch through the square
opening (3) of the rear wall. (Fig. 14)
• Fasten the new rear wall. (Kit water tank)
• Connect the plug connection S05/A of the
main cable harness (former dry running
protection) to PIN 1 of the switch (4). (Fig. 14)
• Connect the plug connections S03/2 to
PIN 2 and S03/3 (2) to PIN 3 of the switch
(3).
(Fig. 14)
• Mount the heating switch to the rear wall.
• Reconnect the power plug.
CAUTION: Make sure that the heating
switch (2) at the rear wall of the
dispenser is switched off,
otherwise the dry running
protection would be activated.
(Fig. 14)
• Switch on the power switch (5), and wait
until the boiler is filled and the float switch
switches off. (Fig. 15)
ATTENTION: Do not touch any parts that are
voltage-supplied.
ATTENTION: Check whether the pump unit
draws water. If not, slightly
press the hoses in order to
generate a pumping movement.
Fig. 14
3
4
2
1
POWER
OFF
ON
xxxxx
xxxxx
STOP
ON
OFF
Fig. 15
5