Douwe Egberts Cafitesse 100, Service Manual, Page: 177 / 210

07.2004
5G - 1
Functions - Housing Service Manual Cafitesse 100
xxx
xx
xxx
xx
ST
OP
xxx
xx
G Housing
G.1 Adjustments
–
ST
OP
xxx
xx
xxx
xx
xxx
xx
16
18
15
G.2 Disassemblies
G.2.1 Disassembly of the Front Part
Preparation:
• Switch off the dispenser and disconnect the
mains supply.
• Disconnect the dispenser from the water
supply.
Disassembly:
• Remove the operating panel cover (1) with
the screw (2). (Fig. 1)
• Remove the front cover and the advertising
panel towards the side.
CAUTION: When the front cover is made
of glass, there is the danger of
being injured due to
unauthorized handling or
breakage of the glass.
• Remove the cooling compartment lid (8).
(Fig. 1)
• Remove the housing cover (9). (Fig. 1)
• Remove the air chute (10). (Fig. 1)
• Remove the rear wall (3). (Fig. 1)
• Loosen the cables (4, 5, 6, 7 ) at the
control. (Fig. 1)
• Remove the fan (11). (Fig. 1)
• Remove the fan console (12). (Fig. 1)
• Remove the metal air supply channel (13).
(Fig. 1)
• Remove the shielding cover (14). (Fig. 1)
• Withdraw the temperature sensor.
• Remove the 2 screws (15). (Fig. 1)
• Remove the tension rod (16), holding the
front part tightly. (Fig. 1)
• Remove the 4 cable harnesses towards the
front.
• Remove the outlet hose (17). (Fig. 1)
• Hold the front part (18) with both hands
and and unhook it. (Fig. 1)
Fig. 1
17
8 9
2
1
11
12
13
14
4
5
3
6
7
10