Douwe Egberts Cafitesse 100, Service Manual

Page: 156 / 210

07.2004
5D - 4
Functions - Product Delivery Service Manual Cafitesse 100
xxxxx
xxxxx
xxxxx
STOP
ON
OFF
8
Fig. 4
• Pull the pot carrier (4) towards the front
and turn it around. (Fig. 4)
• Press the locking mechanisms (5) of the
main switch downwards by using a
screwdriver. (Fig. 4)
• Press the switch towards the front out of
the pot carrier housing. If required, carefully
remove the main switch from the front.
• Disconnect the main switch (6) from the
plug and replace the main switch if
required. (Fig. 5)
• When remounting observe that
- the main switch is mounted in correct
position (ON/OFF). (Fig. 4),
- the cables are not exchanged
S02/1 at PIN 1
S02/2 at PIN 2
S02/3 at PIN 3
- the cable harnesses are placed on the
right and on the left side plates (7) of
the housing and are not bent. (Fig. 4).
- the pot carrier is inserted straightly and
the screws are fastened tightly.
When the dispenser is equipped with a
heating plate (option) or with a café
cool kit, there will be a corresponding
switch (8) on the right-hand side as
well. These switches are dismounted in
the same way as described above.
(Fig. 5)
5
4
Fig. 5
6
7
POWER
OFF
ON