Douwe Egberts Cafitesse 100, Service Manual

Page: 31 / 210

2 - 17
Installation / Putting into Operation Service Manual Cafitesse 100
07.2004
Fig. 13
2
7
3
4
5
6
The bush (1) for the service device is
located behind the upper button. Insert the
upper button (Fig. 12).
• Place a container below the hot water
delivery tap.
• Let at least 6 l (1.32 UK gal/1.58 US gal)
of water run through the boiler by actuating
the hot water delivery tap in order to rinse
the boiler (Fig. 8).
WARNING: There is the danger of being
scalded by hot water. Keep
hands and other parts of the
body away from the delivery
area.
• Remove the protective foil from the splash
panel before putting the dispenser into
operation.
• Insert the flexi-pack.
• Carry out a functional check of the
dispenser.
• Hand over the operating instructions to the
customer.
• Instruct the customer how to operate the
dispenser.
Remark regarding the cup carrier:
• The turn lift support (2) can be attached to
the right side of the dispenser if necessary.
In this position the cup carrier (7) is turned
to the right side during the filling of pots.
(Fig. 13)
• To remove the support, pull the torsion
spring (3) downwards and withdraw the
support pin (4) from the bottom side of the
drip tray support. (Fig. 13)
• Remove the dummy plugs (5, 6) and install
the turn lift support (2) on the right
(Fig. 13).
The tension of the torsion spring can be
changed. Adjust the tension of the torsion
spring in such a manner that the turn lift
support does not rebound when it is locked.
(Fig. 14)
• Mount the dummy plugs (5, 6) to the left
side. The cup carrier locks when it is
turned towards the right side (Fig. 13).
• Adjust the height of the cup carrier (for the
delivery of cups). (Fig. 15)
ST
OP
xxxxx
Fig. 12
1
Fig. 15
Fig. 14
A
B