Douwe Egberts Cafitesse 100, Service Manual, Page: 188 / 210

07.2004
5K - 4
Functions - Power Supply and Control Service Manual Cafitesse 100
Fig. 3
9
10
K.2.2 Disassembly of the Control
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
• Loosen the screw (2) and remove the
operating panel cover (1). (Fig. 1)
• Withdraw the front cover and the
advertising panel (3) towards the side.
(Fig. 1)
CAUTION: When the front cover is made
of glass, there is the danger of
being injured due to incorrect
handling or breaking of the
glass.
• Remove the cooling compartment lid (4).
(Fig. 1)
• Remove the rear wall (5). (Fig. 1)
• Remove the housing cover (6). (Fig. 1)
• Remove the air chute (7). (Fig. 1)
Disassembly:
CAUTION: In order to prevent damaging of
the pc boards and their
components due to electrostatic
charge, first touch a metal table
or a metal cupboard before
touching the pc boards.
Fig. 2
xxx
xx
xxx
xx
ST
OP
xxx
xx
Fig. 1
4
6
7
5
2
1
3
8
• Disconnect all plug connections from the
control (8). Hold the control at the bottom,
tilt it and remove it. (Fig. 2)
• When the control is equipped with the
interface board I
2 C espresso/café cool (10)
loosen the mounting screws (9) and remove
the additional board. (Fig. 3)