Douwe Egberts Cafitesse 100, Service Manual

Page: 17 / 210

2 - 3
Installation / Putting into Operation Service Manual Cafitesse 100
07.2004
Transport due to location change
When transporting single dispensers,
use the handles supplied in the
package.
When transporting a used dispenser to a new
location:
• Switch the main switch off and disconnect
the power supply plug.
• Disconnect the dispenser from the water
supply.
• Remove the flexi-pack.
• Unhinge the floater wire over the float
switch.
• Turn the thermostat to 0 position.
• Drain the boiler.
WARNING: Danger of being scalded by
hot water!
• Pack the dispenser in such a manner that a
safe transport is guaranteed. Use the
original packaging if possible. (Fig.1, 2)
• When used dispensers are stored
intermediately for a long time, ensure that
the hose between the inlet valve and the
boiler is empty to avoid spoiling the taste.
Original packaging by the manufacturer
• European pallets (0.80 m x 1.20 m)
12 Cafitesse100 (max. 2 piles of 6
dispensers)
• U.S. pallets (1.00 m x 1.20 m)
Special pallets made of wood treated
against parasites.
12 Cafitesse100 (max. 2 piles of 6
dispensers)
Storage requirements
• Ambient temperature: 5 °C - max. 32 °C
(41 °F - max. 90 °F)
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
c o ffee
c o ffee
stop
Fig.1
Fig. 2