Douwe Egberts Cafitesse 100, Service Manual

Page: 158 / 210

07.2004
5D - 6
Functions - Product Delivery Service Manual Cafitesse 100
• Depending on the dispenser adjustments
made by the service technician during the
installation, after actuating a push button,
the beverages can be delivered as follows:
1) Portioned delivery
(cup and pot):
The volume of a portion can be
programmed by the service technician. A
new beverage is only delivered when
-
the last delivery process is finished and
- the push button is not pressed any
longer for the previous beverage,
- the preprogrammed break is over and
- another push button is pressed for the
delivery of a new beverage.
2) Continuous delivery
(cup and pot):
The beverage is delivered as long as the
corresponding push button is pressed.
3) Portioned, constantly repeated delivery
(cup only):
A portioned beverage quantity is repeatedly
delivered as long as the corresponding
button is pressed.
• The beverage delivery buttons can be
programmed by the service technician.
• When the stop button (1) has been
actuated, the beverage delivery (except for
the delivery of hot water) is interrupted
directly. (Fig. 1)
ACHTUNG: Do not actuate the delivery
buttons while the low
temperature indicator of the
boiler is shining. In this case
the beverage temperature will
be too low.
• A great variety of national push buttons
with different portion sizes (pictographs) are
available (see spare parts list).
xxxxx
xxxxx
STOP
ON
OFF
xxxxx
D.3.2 Function: Push Buttons
Fig. 1
1