Douwe Egberts Cafitesse 100, Service Manual

Page: 116 / 210

07.2004
5A - 34
Functions - Water System Service Manual Cafitesse 100
Fig. 4
8
Fig. 3
Installation of the kit 'café cool'
Preparation:
• Switch off the dispenser and disconnect it
from the mains supply.
• Disconnect the dispenser from the water
supply.
• Drain the water. (see chap A.2)
• Remove the front part (1). (Fig. 2) (see chap.
G.2)
Installation:
• Mount the valve support (6) to the cold water
inlet valve (5) (solenoid valve) as shown in
fig. 3.
• Fasten the silicone hose (7) with hose
connector (3) and union nut (2) to the outlet
of the cold water valve. (Fig. 3)
• Install the cold water valve at the left
dispenser wall with the outlet side mounted
towards the top. Use clamps (4) for this
purpose. (Fig. 3)
• Push the hose towards the front between
boiler and side wall.
CAUTION: The hose must not be bent or
squeezed.
• Replace the outlet hose (8) at the boiler
outlet valve by means of the shorter outlet
hose (kit 'café cool'). (Fig. 4)
• Insert the angular piece (2) into the housing
7
2
3
4
5
6
Fig. 2
xxx
xx
xxx
xx
ST
OP
xxx
xx
1