93
ED900
02-2020
08125330
dormakaba ED900 Installation Instructions – Double egress door
Chapter 32
32.2 ED900 environment and cleaning
32.2.1 ED900 environmental requirements.
ED900 assembly is designed to operate on an interior
application only under the specifications shown in
Table 32.2.1.
32.2.2 Areas around door(s) and door swing radius.
Areas around doors and door swing radius must be kept
clear of all obstacles.
32.2.3 Cleaning
WARNING
Cleaning of ED900 cover surfaces should be
done with program switches in Close position!
ED900 cover can be cleaned with a damp cloth and
commercial cleaning agents.
TIPS AND RECOMMENDATIONS
Abrasive (scouring) agents should not be used
as they may damage cover surface.
32.2.4 Water and other liquids.
WARNING
No water or other liquids must be sprayed or
spilled on ED900!
Table 32.2.1 Operator environmental requirements.
Fig. 32.2.1 ED900 low energy installation
32.3 Yellow LED, service level
Fig. 32.3.1 Service level indicator
32.3.1 Service level indicator
Yellow LED on operator power switch side is service level
indicator. Operator system should be scheduled for
service when yellow LED is first illuminated, or annually,
whichever comes first.
TIPS AND RECOMMENDATIONS
Reference Appendix A, Parameter detail, for
information on:
• Parameter CS, reset service interval display.
• Parameter CC, cycle counter.
Ambient temperature
5 to 122 °F
[-15 to 50⁰ C]
1
2
3
4
1
Red LED
2
Yellow LED
3
Green LED
4
Power switch
CAUTION
DOOR
AUTOMATIC
DD0586-010
ACTIVATE SWITC
H
TO OPERATE
CAUTION
DOOR
AUTOMATIC
DD0586-01
ACTIVATE SWITC
H
TO OPERATE
