7
ED900
02-2020
08125330
dormakaba ED900 Installation Instructions – Double egress door
Chapter 3
3.1 Safety instructions.
This document contains important instructions for
installation of the ED900 swing door operators.
Review these instructions thoroughly prior to
installation, and follow them carefully during installation,
commissioning, troubleshooting and maintenance
.
3.2 Door signage requirements.
Proper signs and labels, per ANSI/BHMA A156.19
Standard for Power Assist and Low Energy Power
Operated Doors, shall be applied and maintained on the
door controlled by the ED900 swing door operators.
• Reference Chapter 10, ED900 Door Signage.
3.3 Safety warnings.
WARNING
An incorrec
t
installation may result in damage to
equipment or incorrect equipment operation.
WARNING
Hazard to mechanical processes by use of
control settings, elements, or procedures not
documented in this manual!
WARNING
Electric shock hazard!
By use of control elements, settings, or
procedures not documented in this manual!
WARNING
Work on electrical equipment and 115 Vac
wiring installation must be only be performed
by qualified personnel
!
WARNING
Metallic doors must be grounded per national
and local codes!
3 Safety information
WARNING
Hand pinch point and crushing hazards at door
closing edges!
WARNING
Crushing hazards at door closing edges!
3.4 Residual hazards.
WARNING
After installation, hazards such as minor
crushing, impact with limited force, and risk to
unsupervised children may exist depending on
structural design of door area, type of door,
and any safeguards that have been
implemented.
WARNING
Hand pinch point and crushing hazards at
push arm and arm and track!
Fig. 3.1
Door closing edges
Fig. 3.3 Arm and track
Fig. 3.2 Push arm
Opposing
closing edge
Main
closing edge
Secondary
closing edge