81
ED900
02-2020
08125330
dormakaba ED900 Installation Instructions – Double egress door
Chapter 25
11
12
12
Fig. 25.1.1 ED900 terminal connectors
11
Connectors
12
Jumpers
25.1 Install accessory wiring
25.1.1 Connect accessory wiring.
• All accessory wiring terminates at active
door ED900 terminals.
Reference Chapter 9, System Accessories.
1. Use applicable terminal connectors
(Fig. 25.1.1) to terminate accessory
wiring.
TIPS AND RECOMMENDATIONS
• Use documentation provided
with each device for electrical
installation.
• Do not connect system
accessories to board until
operator has been
commissioned and learning
cycle performed
(Chapter 23, 24).
2. Use diagram in Chapter 9 to locate
connector to its socket.
CAUTION
Terminal jumpers.
Jumpers (Fig. 25.1.1/12) must be
in place on monitoring circuits.
25 Connect accessory wiring and test
25.2 Test all accessories
25.2.1 Test all accessories.
1. Test functions of all accessories.
TIPS AND RECOMMENDATIONS
ED900 115 Vac branch circuit
disconnect should be Off while
making accessory connections!