61
ED900
02-2020
08125330
dormakaba ED900 Installation Instructions – Double egress door
Chapter 17
17.4 Slide shoe assembly
Fig. 17.4.1 Slide shoe and pivot pin
9
Slide shoe
10
Pivot pin
11
Retaining ring
17.4.1 Install pivot pin into slide shoe.
1. Insert pivot pin into slide shoe.
2. Install spring clip into pivot pin slot.
9
10
11
17.5 Install hardware into track
17.5.1 Track assembly.
CAUTION
Assemble track hardware based
on RH or LH installation.
1. Remove both end caps (2) and one fixing
piece (3) from track.
1. Slide bumper stop (16), bumper (12) and
slide shoe assembly (9) into track.
• Do not tighten bumper stop M5 screw (17).
2. Secure fixing piece to end of track with
M5 x 15 screw (3.1).
• Use No. 2 Phillips, do not over-tighten.
Fig. 17.5.1 RH track assembly
1
Track
3
Fixing piece
9
Slide shoe
12
Bumper
Fig. 17.5.2 LH track assembly
1
Track
3
Fixing piece
9
Slide shoe
12
Bumper
16
Bumper stop
17
M5 x 13 FHMS
cross recessed
3
3
12
9
1
2
2
16 17
16
Bumper stop
17
M5 x 13 FHMS
cross recessed
1
9
12
3
3
1
2
2
16
17
