Dodge 2010 Caliber Owner'S Manual Download Page 51 | Manualshive

Page: 51 / 470

background image

CAUTION!

All occupants, including the driver, should not oper-
ate a vehicle or sit in a vehicle’s seat until the head
restraints are placed in their proper positions in order
to minimize the risk of neck injury in the event of an
accident.

NOTE:

For more information on properly adjusting and

positioning the head restraint, refer to “Adjusting Active
Head Restraints” in “Understanding The Features Of
Your Vehicle”.

Resetting Active Head Restraints (AHR)

If the Active Head Restraints are triggered in an accident,
you must reset the head restraint on the driver’s and
front passenger seat. You can recognize when the Active
Head Restraint has been triggered by the fact that they
have moved forward (as shown in step three of the
resetting procedure).

1. Grasp the deployed AHR from the rear seat.

2. Position the hands on the top of the deployed AHR at
a comfortable position.

Hand Positioning Points On AHR

50

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
49
50
51
52
53
...
»

Summary of Contents for 2010 Caliber























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Caliber

Brand: Daihatsu Pages: 485

Brand: Camoplast Pages: 60

SP200 - QUICKSTART GUIDE 1

Brand: Jabra Pages: 2

BT150 - Headset - Over-the-ear

Brand: Jabra Pages: 2

Brand: Paxton Automotive Pages: 85

Brand: Thule Pages: 8

Autostacker PL-6SR

Brand: BendPak Pages: 104

Brand: Wilco Offroad Pages: 4

Xplore Pro II SxS

Brand: Marlon Pages: 15

Brand: Jeep Pages: 380

Brand: B-Speech Pages: 4

Brand: Park-Daddy Pages: 22

Brand: Guidosimplex Pages: 8

Brand: Ford Pages: 52

OPTIA hybrid 2020

Brand: Kia Pages: 54

Brand: Prorack Pages: 15

Charger SRT 392 2017

Brand: Dodge Pages: 576

Brand: Lexus Pages: 108

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands