Dodge 2010 Caliber Owner'S Manual Download Page 32

Page: 32 / 470

3. Within 30 seconds, press the power door UNLOCK
switch to unlock the doors.

4. A single chime will indicate the completion of the
programming.

5. Repeat these steps if you want to return this feature to
its previous setting.

NOTE:

•

If you do not hear the chime it means that the system
did not enter the programming mode and you will
need to repeat the procedure.

•

Use the Automatic Unlock Doors On Exit feature in
accordance with local laws.

Child-Protection Door Lock System (Rear Doors)
— If Equipped

Insert the tip of the ignition key into the lock and rotate
to the LOCK or UNLOCK position.

Child-Protection Door Lock Location

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 2010 Caliber























































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Caliber

Reviews:

Related manuals for 2010 Caliber

Brands by name

Popular brands

Dodge 2010 Caliber, Owner'S Manual

Search results

Summary of Contents for 2010 Caliber

Reviews:

Related manuals for 2010 Caliber

Brands by name

Popular brands