manualshive.com logo in svg

Dodge 2010 Caliber, Owner'S Manual

The Dodge 2010 Caliber boasts an impressive range of specifications, delivering outstanding performance and style. Explore its detailed manual, available for free download on our user-friendly website. Discover all the features, settings, and maintenance guidelines to enhance your driving experience from manualshive.com.

Share
Download
background image

Preparations For Jacking

1. Park the vehicle on a firm level surface, avoiding ice or
slippery areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid the danger of being hit when
operating the jack or changing the wheel.

2. Set the parking brake.

3. Place the shift lever in PARK (automatic transaxle) or
REVERSE (manual transaxle).

4. Turn OFF the ignition.

5. Turn on the Hazard Warning flasher.

6. Block both the front and rear of the
wheel diagonally opposite the jacking
position. For example, if changing the
right front tire, block the left rear
wheel.

NOTE:

Passengers should not remain in the vehicle

while the vehicle is being jacked.

6

WHAT TO DO IN EMERGENCIES

363

Summary of Contents for 2010 Caliber























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 2010 Caliber

Camcar 2155 Fitting Instructions preview
2155
Brand: Camcar Pages: 2
Daihatsu TERIOS J100 Maintenance Manual preview
TERIOS J100
Brand: Daihatsu Pages: 43
cam HS Series Operating Manual preview
HS Series
Brand: cam Pages: 28
JASTEC von-S2 Instruction Manual preview
von-S2
Brand: JASTEC Pages: 12
Parrot CK3300 Setup Information Manual preview
CK3300
Brand: Parrot Pages: 19
Parrot Minikit+ Quick Start Manual preview
Minikit+
Brand: Parrot Pages: 88
Parrot Minikit+ Information Sheet preview
Minikit+
Brand: Parrot Pages: 2
Parrot CK3100 LCD Specifications preview
CK3100 LCD
Brand: Parrot Pages: 2
Parrot CK 3000 Evolution Installation Notes preview
CK 3000 Evolution
Brand: Parrot Pages: 8
Parrot CK 3000 Evolution User Manual preview
CK 3000 Evolution
Brand: Parrot Pages: 106
Metra Electronics 95-6556 Installation Instructions preview
95-6556
Brand: Metra Electronics Pages: 4
Rostra REARSIGHT OnStar 250-8822 Installation Instructions preview
REARSIGHT OnStar 250-8822
Brand: Rostra Pages: 2
Over Armour Offroad TX-STAMP-4-FC04 Instructions For Installation And Care preview
TX-STAMP-4-FC04
Brand: Over Armour Offroad Pages: 9
JBL smartbase Quick Start Manual preview
smartbase
Brand: JBL Pages: 12
Subaru SPN0001105 User Manual preview
SPN0001105
Brand: Subaru Pages: 44
Roadmaster 195125 Assembly And Operating Instructions preview
195125
Brand: Roadmaster Pages: 4
Blaupunkt 7 608 502 000 Installation Instructions Manual preview
7 608 502 000
Brand: Blaupunkt Pages: 6
Mitsubishi Outlander Plug-in hybrid Quick Manual preview
Outlander Plug-in hybrid
Brand: Mitsubishi Pages: 28

Brands by name

Popular brands

Load more brands