Docomo N-04A, Instruction Manual

Page: 247 / 570

245
1Seg
Volume …… Sets the alarm tone volume
with
c
.
Priority
*2
…… Set operation to be performed
when the start date and time arrives while using
1Seg/Music group (1Seg, Data Box (1Seg),
Music, Music&Video Channel).
Recording
……
Interrupt/End current
operation to start recording.
Operation preferred
……
Display the
confirmation screen. Select “YES” to
interrupt/end current operation to start
recording.
Activate TV w/ alarm
*3
…… Set whether to
activate (ON, OFF) 1Seg from the alarm
notification screen.
You can watch the booking program to Sets
“ON”, and then activate 1Seg from the alarm
notification screen
d
(ON) to select “YES”.
*1: For Booking program, set “Date setting(from)”.
*2: Set only for Timer recording.
*3: Set only for Booking program.
4
o
(Finish)
If timer recording confirmation appears, select
“YES”. If “YES (default)” is selected, the screen
will not appear from the next time.
● When the recording is completed
Desktop icon “ ”appears. Select “ ” to view up to
100 results from the latest.
Select recording result to play recorded program.
Booking program list screen/
Timer recording list screen
(P.244)
New, Edit
Sort
……
Sorts the booking list in a selected criteria.
Delete …… Selects the deleting method from “Delete
this, Delete selected, Delete past, Delete all”.
• “Delete past” deletes entries with start date and
time set before current date and time.
Memory info
*
*: Only available on the “Timer recording list” screen.
N
<Booking program>
z
If multiple alarm entries are added for the same
date and time, priority is given to an entry with
earlier start date and time. If two or more
programs with the same start and time are
booked, top priority is given to the one with the
earliest alarm time.
<Timer recording>
z
If two or more programs with overlapped recording
time are booked, top priority is given to the one
with the latest start time. If two or more programs
with the same start time are booked, priority is
given to the one stored later.
z
Note that you cannot record any program if the
FOMA terminal is in the following status about 1
minute before start date and time.
• Powered off
• During Dial lock/Omakase Lock
• During infrared data exchange/iC
communication
• Software Updating
z
Recording may not start at specified date and time
in the following cases:
• Weak signals
• Unstable reception
• Video image is not provided
• Insufficient memory in destination
• A microSD card is not inserted in the FOMA
terminal.
z
1Seg audio does not play during timer recording.
To play audio, press
t
or adjust volume.