Docomo N-04A, Instruction Manual

Page: 407 / 570

405
Netw
ork Ser
vices
Switching phone numbers each time
when making a call
When 2in1 is set to ON and the mode is set to Dual
mode, phone numbers can be switched when making
a call.
z
This function is available only on the detail screen
of “Phonebook/Received calls/Dialed calls/Redial”.
<Example: When making a call using the
phonebook>
1 Phonebook detail screen (P.83)
u
(FUNC) “Dial setting”
“2in1/Multi Num.” Select any
item:
Number A, Number B
……
Allows calls to be
made from Number A or Number B.
Cancel number
……
Releases the setting and
allows calls to made according to Phonebook
2in1 setting.
OFFICEED
<OFFICEED>
“OFFICEED” is a flat-rate group service provided by
the specified IMCS (Indoor Mobile Communication
System). You need a separate subscription to this
service.
For details, refer to the DOCOMO corporate website
(http://www.docomo.biz/d/212/) (only in Japanese).
<Stand-by display>
z
When Change Mode is set to A mode, standby
screens are displayed according to “Display
setting”.
z
When the pre-installed “Direct Menu”,
downloaded Kisekae Tool, i-
α
ppli standby screen
or random display is set as the standby screen,
the default screen for each mode appears even
when “Same as Number A” is set.
<Disp. call/receive No.>
z
Names, phone numbers and mail addresses in
the screens below will be displayed in the set
color.
• In-call screen
• Dialing/Receiving screen
• Redial/Dialed calls (list/detail)
• Received calls (list/detail)
• Sent
*
/Received address record screen (list/
detail)
• Chaku-moji Sent messages record screen
*: In B mode, the screen for sent addresses cannot be
displayed.
z
The setting for Number A/Number B (Address A/
Address B) is referred in the screen while
incoming a call, etc. even when 2in1 is set to OFF.
<Ringtone for Number B>
z
When making the same settings to Number A and
Address A, set each item as “Same as Number
A”.
z
When the ring tone settings are duplicated, the
priority applies.
→
P.93
z
When you receive a call without caller ID on
Number B, the priority applies in the following
order:
①
“V.phone (recv.)” in “Ringtone for Number B”
② “Call setting w/o ID”
③ “Voice call (recv.)” in “Ringtone for Number B”
N
N
z
When the following operations are performed, the
phone number selection screen is displayed and
the phone number to use can be selected.
• When making calls by entering phone number in
the phone number entry screen
• When using services from the special number
registered in Additional service
• When “Dialing” from the function menu in Sent/
Received address list is selected
• When using the Phone to function
• When pressing the switch on the Earphone/
Microphone (optional) on the phone number
entry screen
z
Dialing or AT command dialing from an external
device uses Number A for A mode/Dual mode and
Number B for B mode.