Docomo N-04A, Instruction Manual

Page: 338 / 570

336
Data Mana
g
ement
z
The devices may not communicate successfully if
they are placed in direct sunlight, directly under a
fluorescent light, or close to other infrared
equipment.
Sending Data with Infrared Data
Exchange
<Send Ir data>
Sends infrared data from the function menu of the
Data list screen or the detail screen.
z
When you send a JPEG image, you can select
High-speed infrared communication (IrSS
TM
transmission).
<Example: Send one phonebook data>
1 Phonebook detail screen (P.83)
u
(FUNC) “Send Ir data”
■ Sending all phonebook entries at a time
“Send all Ir data” Enter your security
code Enter session number
“Session number”
→
P.335
■ IrSS
TM
transmission
If sending image data in JPEG format, you can
press
o
(IrSS) in an Image list screen (P.300)
to use the High-speed infrared communication
(IrSS
TM
transmission).
2 Set the receiving device ready to
receive
3 Direct the Infrared data port
toward the other part’s device
“YES”
The data transmission starts.
After the data is sent, a message appears
indicating that the communication is complete.
■ To exit somewhere in the middle of the
data transmission
o
(Quit)
Receiving Data with Infrared Data
Exchange
<Receive Ir data>
z
When you receive all, all the data on the FOMA
terminal is overwritten by the received data and
stored data are deleted including protected mails
and secret data of the phonebook or schedule.
However, frames and secret data in the secret
folder are not deleted. Check if there is an
important data before receiving all the data.
z
Transferring all may change the order of data on
the recipient.
<Example: Receiving a phonebook entry>
1
i
“LIFEKIT” “Receive Ir data”
■
To paste a function as a desktop icon
u
(FUNC) “Add desktop icon”
2 “Receive” Direct the Infrared
data port towards the other part’s
device
■ Receiving all data at a time
“Receive all” Enter your security code Enter
session number Direct the infrared data port
toward the other party’s device “YES” Select
“YES” when the overwrite confirmation screen
appears
“Session number”
→
P.335
Infrared data
port
Approx. 20 cm
or less
With in the
range of
±
15
°
N
z
When you select “IrSS”, the sender may be
completed correctly even though the other party
cannot received the data correctly.