Docomo N-04A, Instruction Manual

Page: 235 / 570

233
Came
ra
Scanning text
<Example: To scan text in Card read mode>
1
i
“LIFEKIT” “Text reader”
■ To paste a function as a desktop icon
u
(FUNC) “Add desktop icon”
2 “New”
“Scanning mode” → P.231
3 “Card read”
The camera mode is set to
“Close-up” automatically.
4 Use
v
to highlight the icon for
the item to scanu Display the text
in the recognition field
Focus the text so that the entire text appears as
large as possible inside the recognition field.
If the recognition field cannot display the whole
text, the text can be scanned several times.
■ To adjust the zoom
f
: Changes from “Normal” to “Large”.
g
: Returns from “Large” to “Normal”.
5
d
(Read)
The canning completion tone sounds, and the
recognized text appears in red.
■
To rescan the text
t
“YES”
If the screen does not display the entire text,
press
b
to check.
Pressing
p
(Store) stores the scanned text,
and then the reading data screen (detail)
appears.
The following are the two methods to edit the
scanned text:
■ To select the character
to edit
Use
v
to highlight the
character to edit Press the
candidate No.
Use
w
to change the
cases between upper and
lower if it can be changed.
■ To edit in the text
editing
u
(FUNC) “Edit” Edit
the text
The text can be edited in the
typical text editing.
To return to the candidate selection, press
u
(FUNC) and select “Select recog. data”.
Go on to Step 6 when you finish editing.
6
d
(Set)
The entry is fixed as the text.
■
To scan the remaining text
To display the scanned text in the recognition
field Go to Step 5
Ensure that the last two or more characters of
the scanned text are included in the recognition
field.
■ To scan another item
Go to Step 4
In Card read mode, you can scan up to 4 phone
numbers and up to 3 mail addresses.
7
u
(FUNC) “Store”
The Reading data detail screen appears. Press
t
to return to the Reading data list screen.
Text reader scanning
Function menu P.234
Candidates
N
z
Do not move the FOMA terminal while the
“Processing” message appears on the screen.
z
When set to manner mode, the scanning
completion tone does not sound.
z
Handwritten characters cannot be recognized.
The FOMA terminal may fail to recognize the text
when the characters are faxed or copied, the font
is decorated, the character spaces are not fixed,
or the characters and background cannot be
easily distinguished. The text recognizing is also
failed depending on the ambient lighting.