Docomo N-04A, Instruction Manual

Page: 97 / 570

95
Sound/Scre
en/Light Settings
Changing the Ringback Tone
<Melody Call setting>
You can set whether to change the tone heard by the
other party or not (YES, NO) when you receive a
voice call.
1
i
“SETTINGS/SERVICE”
“Incoming call” “Melody Call
setting” “YES” or “NO”
When you select “YES”, accesses the Melody
Call i-mode site. Packet communication charge
is not applied for the setting site. However,
connecting to the IP site, the i-mode menu site,
the free music page incurs packet
communication charges.
Follow the instructions on the screen to set.
Setting Sound when Key/
Touch Sensor is Pressed
<Keypad sound>
z
Setting this function to “OFF” also disables the
battery level tone and the warning tone.
z
The sound is played at the level set in “Volume”
during a call, and fixed at the same level while not
talking on the phone.
1
i
“SETTINGS/SERVICE”
“Key/Touch sensor” “Keypad
sound” “ON” or “OFF”
Setting Slide Sound Effects/
Tones
<Slide sound>
Sets a sound effect/tone to play when the FOMA
terminal is opened/closed.
1
i
“SETTINGS/SERVICE”
“Slide-style setting” “Slide
sound” “Open sound” or “Close
sound”
2
Select any item:
Melody …… Selects a sound from a melody
folder.
Ring time …… Sets the beep time value.
OFF …… No beep is played.
Setting the Confirmation Tone
for Charging
<Charge sound>
This function sets to emit a short double-beep
(“bibip”) when charging starts and ends.
z
When the screen other than Standby screen is
displayed or when Manner mode or Public mode
(Driving mode) is set, the charge sound does not
ring.
1
i
“SETTINGS/SERVICE”
“Other settings” “Charge sound”
“ON” or “OFF”
Setting the Clock Alarm Tone
<Clock Alarm Tone set>
You can change the clock alarm tone for the alarm,
schedule, To Do list and 1Seg booking program.
1
i
“SETTINGS/SERVICE”
“Clock” “Clock Alarm Tone set”
Select any item:
Select the alarm tone from “Melody, i-motion,
Music, Voice announce, OFF”.
<Vibrator priority>
z
When the vibrator settings are duplicated, the
priority is assigned as follows:
① Vibrator for “Ring tone/Image (for individual)”
②
Vibrator for “Ring tone/Image (for group)”
③ Vibrator for B mode of 2in1
④ Vibrator setting
N
z
Melody Call is not activated when the other party
dial up from a videophone call.
N
N
z
You cannot change the volume of the beep.
z
If i-
α
ppli is set as the standby screen, there is no
sound.