Docomo N-04A, Instruction Manual

Page: 195 / 570

193
i-mode/i-motio
n/i-Channel/i-concie
r
Changing from i-mode to another ISP
connection
<Host selection>
Set a host for services other than i-mode. If you
change the host to a host other than i-mode, you
cannot use i-mode and i-mode mail.
z
You can store up to 10 hosts other than “i-mode”.
1
i
“SETTINGS/SERVICE”
“Connection setting” “Host
selection” Highlight “<Not
recorded>”
o
(Edit) Enter your
security code Select any item:
Host name, Host number …… Sets the host
name or the host number.
Host address, Host address2 …… Sets the
host address or the host address2.
2
o
(Finish)
Setting whether to use phone
information for Flash movies
<Use phone information>
Use this function to specify whether terminal data is
used when a Flash movie is running.
z
The terminal data may be used depending on the
particular Flash movie. Set “Use phone
information” under “i-mode settings” to “Accept” so
that Flash movies can use phone information.
Flash movies use the following types of phone
information:
• Battery level • Ring volume setting
• Signal strength • Select language
• Date and time • Model data
1 i-mode settings screen (P.192)
“Use phone information”
“Accept” or “Reject”
Using SSL Certificates
You can check the details of an SSL certificate or to
set to valid/invalid.
1
i
“SETTINGS/SERVICE”
“Connection setting”
“Certificate”
2 Select a certificate Check the
details
■ To validate or invalidate SSL certificates
Highlight a certificate
u
(FUNC) “Valid/
Invalid”
* There is normally no need to change this setting.
N
z
Pake-hodai, Pake-hodai full and Pake-hodai
double do not cover packet communications
charges incurred while connecting to a host other
than “i-mode”.
z
When you change the host, the ticker of i-Channel
is turned off. The ticker is turned on again
automatically when the information is updated
automatically or when
u
is pressed to receive
the latest information.
z
After changing the host, the i-Channel information
may not be updated automatically. To receive the
latest information, press
u
to display the channel
list screen.
N
z
When set to “Valid”, “ ” appears. When set to
“Invalid”, “ ” appears.
z
If you select “Invalid”, you cannot view SSL pages
with that SSL certificate.