Docomo N-04A, Instruction Manual

Page: 397 / 570

395
Netw
ork Ser
vices
Basic flow of Call forwarding service
operation
Call forwarding service call charges
Using the Call Forwarding service
1
i
“SETTINGS/SERVICE”
“Service” “Call Forwarding”
Select any item:
Activate
*1
…… Set the forwarding number and
the ring time, then select “Activate”.
Register fwd number …… Enter the
forwarding number.
Once you set the number, a star “ ★ ”
appears next to “Register fwd number”.
• You can use
f
or
g
to enter the
number by searching the phonebook.
How to search the phonebook → P.84
Set ring time …… Enter the ring time (000
to 120 seconds).
Once you set the number, a star “
★
”
appears next to “Set ringing time”. When
set to 0 second, received calls are not
recorded in the “Received calls” record.
Activate …… Activates the Call forwarding
service.
Deactivate
*1
Change forwarding No …… Change forwarding
NoEnter the forwarding number, and select
“Change No.” or “Change No.+Activate”. When
you select “Change No.+Activate”, you can also
set the Call Forwarding Service to “Activate” at
the same time.
Fwd number busy
*2
…… When the forwarding
number is busy, received calls are transferred to
the Voice mail service center.
Check setting
*1
*1: When 2in1 is set to Dual mode, the screen
appears to select Number A or Number B.
However, the selection screen appears for
“Check setting” even in B mode.
*2: The subscription to the “Voice Mail service” is
required.
Setting or canceling the call
forwarding guidance message
1 On the standby screen
1429 r
• Set the call forwarding guidance message by
following the audio guidance message.
• For more information, refer to the “Mobile
Phone User’s Guide [Network Services]”.
Call Forwarding service activated
Your FOMA terminal receives a voice/videophone
call
Call Forwarding number registered
If you do not answer the voice or videophone call,
it is automatically forwarded to the specified
number
Caller
Call
Forwarding
service
Forwarding
number
Charges paid
by the caller. Charges paid by the Call
Forwarding service subscriber
N
<Activate>
z
When 2in1 is set to B mode, you cannot select
“Register fwd number” and “Set ring time”.
<Change forwarding number>
z
When 2in1 is set to B mode, you cannot select
“Change No. + Activate”.
<Check setting>
z
When checking Number B setting for 2in1, only
“Active” or “Inactive” appears.