Docomo N-04A, Instruction Manual

Page: 310 / 570

308
Data Mana
g
ement
● Adding frames
z
You can use the downloaded frames in addition to
the pre-installed ones.
1
My picture screen (P.300)
u
(FUNC) “Edit image” “Frame”
Select a frame
The image is displayed in the selected frame.
Use
v
to change to another frame.
■ To rotate the frame 180
°
o
(Rotate)
■ To cancel the selected frame
u
(FUNC) “Cancel”
● Pasting marker stamps
z
You can use the downloaded marker stamps in
addition to the pre-installed ones.
z
You can rotate, enlarge or reduce marker stamps.
1
My picture screen (P.300)
u
(FUNC) “Edit image” “Marker
stamp” Select a marker stamp
■
To rotate or scale up/down
u
(FUNC) Select any item
2 Adjust the marker stamp position
with
b d
(Put)
■ To paste another marker stamp
o
(Add) Repeat Steps 1 to 2
● Pasting character stamps
z
You can enter up to 15 double-byte or 30 single-
byte characters as a stamp. The number of
characters that can be entered differs depending
on the image size and character size.
z
You can change the character stamp color, font and
size.
1 My picture screen (P.300)
u
(FUNC) “Edit image”
“Character stamp” Enter
characters
■ To edit a character stamp
u
(FUNC) Select any item:
Character input
……
Edit text.
Character color …… Sets the color.
To use another color palette, press
o
(Change).
Font type
……
Selects form “Gothic, Ming-cho”.
Font size …… Selects from “Enlargement size,
Standard size, Reduction size”.
2
Adjust the character stamp
position with
b d
(Put)
N
z
If the size of the image that has been trimmed or
resized is the same as that of the frame, the
image can be framed.
N
z
You can only use downloaded stamps of 240 dots
wide × 240 dots high or smaller. The stamps
larger than the above size are handled as GIF
images.
N
z
The font thickness is specified in the “Font”
setting.