Docomo N-04A, Instruction Manual

Page: 240 / 570

238
1Seg
Setting Channels
<Channel setting>
To use 1Seg, set channels and select a channel list
beforehand. Register a channel list for each area.
Selecting the channel list allows you to watch local
channels.
z
Up to 10 channel lists can be registered, each of
which can contain up to 50 broadcast stations.
z
Receivable channels vary depending on the area.
Registering channel lists
1
i
“1SEG” “Channel setting”
“Select area”
■ To search for channels automatically and
register a channel list
“Auto-channel setting” “YES” “YES” Enter
title
To interrupt search, press
o
(Cancel) or
t
then select “YES”.
• Extend the antenna when setting
automatically.
2
Select area Select prefecture
“YES”
Selecting channel lists
Select a channel list to set channels.
1
i
“1SEG” “Channel list”
2 Select channel list
Channel lists to be received
are set.
Channel list screen (P.238)
Channel setting → P.238
Edit title, Delete this
Channel info screen (P.238)
Remote control No.
……
Change channel set to
remote control No.
Delete this
*
*: When all channels in the channel list are deleted, the
channel list is also deleted.
N
z
“Select area” may not work properly depending on
the area. In this case, use “Auto-channel setting”.
z
Perform “Auto-channel setting” in digital terrestrial
broadcast range where the radio wave can be
received.
z
A message may appear indicating that Remote
control No. are duplicated in “Auto-channel
setting”. In this case, select area manually.
N
z
You cannot delete the current channel list in the
channel list screen or the channel info screen.
Delete it after changing to the another channel list.
Channel list
Function menu P.238
Channel info
Function menu P.238