Docomo N-04A, Instruction Manual

Page: 5 / 570

3
z
The screens shown as examples in this manual are displayed when “English” is set for “
バイリンガル
”
(Select language). Set “English” for “ バイリンガル ” (Select language) in advance. → P.50
z
In this manual, “Stand-by display” is set to “OFF”, back color is set to white and font color is set to black in
order to make the screens clear. In the “Clock display”, “Display” is set to “ON”, “Size” is set to “Big”,
“Color” is set to “Black”. Also, the parts of the operating instruction screens that need an explanation are
closed up.
z
In this manual, descriptions are basically based on the default settings, and screens displayed on the
FOMA terminal may differ from the descriptions in this manual.
z
The screens inserted in this manual are only the images, which look different from the actual screens.
z
In this manual, “Osaifu-Keitai i-
α
ppli compatible with IC card function” is described as “Osaifu-Keitai i-
α
ppli”.
z
In the operational explanations described in this manual, very simple illustrations to indicate the operation
of pressing keys are very often used. In cases where both the Touch sensor and the Key operation
functions are available, the Key operation is preferably chosen to be described in this manual.
353
s
n
oi
t
c
n
u
F
t
n
ei
n
e
v
n
o
C
Using the Alarm Function
<Alarm>
You can store up to 10 alarms.
1
i
“LIFEKIT” “Alarm”
■ To switch on/off without
changing the current
setting
Highlight the setting item
p
(ON/OFF)
“ON, OFF” switches each
time you press
p
.
■ To check the previous
settings
Select the setting
2
Highlight the item to set
o
(Edit)
3 Select any item:
Edit title …… Edits the Alarm title. The
entered details are displayed during alarm
notification.
Time setting …… Enters the time at which
the alarm will sound.
Repeat …… Selects the alarm repetitions
from “1 time, Daily ( ), Select day ( )”.
Alarm tone …… Selects the alarm tone from
clock alarm tone or folders of melody, i-motion,
music, etc.
Volume …… Sets the alarm tone volume
with
c
.
Pattern …… Select a flashing pattern for
illumination.
Color …… Sets a color of the Key
illumination.
Snooze setting …… Specifies whether a
snooze (repeating) alarm is set or not.
ON …… Enter the number of times for
ringing (01 to 10 times) and the ringing
interval (01 to 10 minutes).
The alarm tone (about 1 minute) rings
repeatedly for the set number of times in
the set interval.
OFF …… Enter the ringing time (01 to 10
minutes).
Sounds the alarm tone continuously for the
specified time.
Auto power ON …… Specifies whether the
FOMA terminal is automatically turned on or not
when the time for an alarm is reached.
4
o
(Finish)
Alarm list screen (P.353)/Alarm
detail screen (P.353)
Edit
Display detail
*
…… Displays the alarm contents.
Finish(Set this) …… Activates the alarm.
Release this …… Release an alarm.
Release all …… Release all set alarms.
*: Available only with the Alarm list screen.
Alarm list
Function menu P.353
Alarm detail
Function menu P.353
N
When PIN1 code entry set is set to ON and the
power is automatically turned on to sound an
alarm, the Alarm Tone sounds even if a melody,
i-motion or song downloaded from sites is set as
an alarm tone.
Before entering an area such as an aircraft or
hospital where there is electronic equipment that
uses extremely precise control systems or very
low signal levels and the use of mobile phones is
prohibited, set the “Auto power ON” setting to
“OFF” and then turn the FOMA terminal off.
Continued on next page
Describes the
function name.
Describes the
operation on
each step.
Describes the
explanation of
each item.
The function
menu title is
described with the
icon of the
function menu
and the screen
name on which
the function menu
is displayed. Describes the
screen at the time
of the operation.
Compare it with
the screen when
you operate.
You can search
the chapters
using the index.
Page number
Indicates that the
descriptions go
on to the next
page.
Describes the
necessary
settings, notes
or useful
information about
the function.
Describes the
items displayed
on the screen
(some items
cannot be
operated
depending on the
operation).
This manual uses illustrations and marks to explain how to operate the function so that
you can use the FOMA terminal correctly.
* The contents above differ from the actual ones in
this manual.