Docomo N-04A, Instruction Manual

Page: 355 / 570

353
Con
venient Fu
nctions
Using the Alarm Function
<Alarm>
z
You can store up to 10 alarms.
1
i
“LIFEKIT” “Alarm”
■
To switch on/off without
changing the current
setting
Highlight the setting item
p
(ON/OFF)
“ON, OFF” switches each
time you press
p
.
■ To check the previous
settings
Select the setting
2
Highlight the item to set
o
(Edit)
3
Select any item:
Edit title …… Edits the Alarm title. The
entered details are displayed during alarm
notification.
Time setting
……
Enters the time at which
the alarm will sound.
Repeat
……
Selects the alarm repetitions
from “1 time, Daily ( ), Select day ( )”.
Alarm tone …… Selects the alarm tone from
clock alarm tone or folders of melody, i-motion,
music, etc.
Volume …… Sets the alarm tone volume
with
c
.
Pattern …… Select a flashing pattern for
illumination.
Color …… Sets a color of the Key
illumination.
Snooze setting …… Specifies whether a
snooze (repeating) alarm is set or not.
ON …… Enter the number of times for
ringing (01 to 10 times) and the ringing
interval (01 to 10 minutes).
The alarm tone (about 1 minute) rings
repeatedly for the set number of times in
the set interval.
OFF …… Enter the ringing time (01 to 10
minutes).
Sounds the alarm tone continuously for the
specified time.
Auto power ON
……
Specifies whether the
FOMA terminal is automatically turned on or not
when the time for an alarm is reached.
4
o
(Finish)
Alarm list screen (P.353)/Alarm
detail screen (P.353)
Edit
Display detail
*
……
Displays the alarm contents.
Finish(Set this)
……
Activates the alarm.
Release this …… Release an alarm.
Release all …… Release all set alarms.
*: Available only with the Alarm list screen.
Alarm list
Function menu P.353
Alarm detail
Function menu P.353
N
z
When PIN1 code entry set is set to ON and the
power is automatically turned on to sound an
alarm, the Alarm Tone sounds even if a melody,
i-motion or song downloaded from sites is set as
an alarm tone.
z
Before entering an area such as an aircraft or
hospital where there is electronic equipment that
uses extremely precise control systems or very
low signal levels and the use of mobile phones is
prohibited, set the “Auto power ON” setting to
“OFF” and then turn the FOMA terminal off.