Configuring the Module in a DEChub 900 4-7
[3] Show Current Settings
[3] Show Current Settings
This option shows the module’s current settings. If the module is being configured for
the first time, some fields are blank.
The following example shows the display associated with this option.
Enter selection : 3
DECserver 900MC,Network Access SW V2.1,HW=V1.4,RO=V6.4-0,SW=BL11,
LAT V5.1, LOAD IMAGE: WWENG2
SysUpTime : 00:49:59 0 resets
SNMP Read/Write Community : PRVTRW
Interface IP Address Subnet Mask Def.Gateway Other Info
Ethernet 16.20.52.101 255.255.255.0 08-00-2b-a2-a4-34
==================================================================
Press Return Key to Continue .....
DECserver 900MC - slot 3
==================================================================
=================================================================
DECserver 900MC - slot 3
