Configuring the Module in a DEChub 900 4-3
[5] Start Redirect Mode
[5] Start Redirect Mode
The
Start Redirect Mode
option redirects the DEChub 900 MultiSwitch Hub
Manager set-up port to the set-up port of any network module (such as the DECserver
900MC) that is installed into the DEChub 900. This option allows you to configure or
obtain status of an installed network module by accessing the specified network
module’s installation menu.
After you choose the
Start Redirect Mode
option from
the DEChub 900
MultiSwitch INSTALLATION MENU
, the screen prompts you for a slot number
as shown in the following example. After you enter the number of the slot in which the
DECserver 900MC is installed (3, in this example), the console is redirected to this
slot.
NOTE
The slot number will change to reflect the slot in which your module is installed.
The following example shows you how to select a slot number:
If the redirection is successful, after you press <Return>, the
DECserver 900MC
INSTALLATION MENU
appears on your screen.
Enter selection: 5
=====================================================
Enter the slot number for redirection (1-8): 3 <Return>
Console redirected to 3: DECserver 900MC
Attempting connection [Ctrl/C to Abort]...
Connection successful!