AT Commands F-29
AT Commands
-K
n MNP Extended Services
-K0
Disables MNP Extended Services.
-K1
Enables MNP Extended Services.
-K2
Enables MNP Extended Services without MNP indication during the answer detect
phase.
MNP Extended Services allow two modems that support them to use MNP data
services that are not available with LAPM. For example, two modems with MNP
Extended Services enabled will negotiate MNP Class 10 with V.42bis compression in
preference to LAPM.
:K
n Kermit/UUCP Protocol
:K0
Disables Kermit and UUCP spoofing asynchronous protocols.
:K1
Enables Kermit spoofing asynchronous protocol.
:K2
Enables UUCP spoofing asynchronous protocol.
Enables the Kermit or UUCP spoofing asynchronous protocol (emulation). The same
protocol (Kermit or UUCP) must be enabled on both the originating and answering
modems. You can use the Kermit and UUCP protocols only during an MNP reliable
connection, with or without data compression. The protocols are not available during
direct, normal, or synchronous operation.
The Read Online Status command displays KERMIT when the modem establishes a
Kermit connection and UUCP for a UUCP connection.
See also the :Q command.
\K
n Break Control
Where n is a number between 0 and 5 indicating the type of Break the modem transmits
(Default is 5).
Determines the type of Break the modem transmits when a Break enters the modem.
The following tables list the different effects of the n value when the modem receives
or transmits the Break. The modem can buffer up to four Breaks on both the modem
port and the serial port.
NOTE
In the reliable link connect state, the sender’s Break control setting determines
how the receiver handles the Break.
