Configuring the Module in a DEChub 900 4-5
[1] Reset with Factory Defaults
[1] Reset with Factory Defaults
This option reboots the module, causing its configured Non-volatile Random Access
Memory (NVRAM) parameters to be initialized to factory default values followed by
a module reset. If you need to reboot the module and retain the current settings, choose
option
[2]
from the
DECserver 900MC INSTALLATION MENU
.
CAUTION
This action deletes all configured settings and replaces them with factory default
values. All configuration settings will be lost.
NOTE
Allow approximately 3 to 5 minutes for the module to reboot and complete
self-test.
The following example shows the dialog associated with this option:
Enter selection : 1
DECserver 900MC
==========================================================
RESET WITH FACTORY DEFAULTS
* * * * * * * * * * * * * * * * * * * * * * * * * *
* IMPORTANT! IMPORTANT! IMPORTANT! *
* * * * * * * * * * * * * * * * * * * * * * * * * *
This selection will delete the current configuration
settings and reset the system with the factory default
settings. All configuration settings will be lost.
* * * * * * * * * * * * * * * * * * * * * * * * * *
==========================================================
Press Y to confirm [N]: Y <Return>
Press Return for Main Menu...
- slot 3
