How to Install the Module
2-8 Installing the Module
How to Install the Module
The hot-swap feature allows you to install the module into the DEChub 900 without
turning off power to the hub. Seating the module initiates the module’s powerup
sequence if enough power is available.
To install the module, complete the following tasks:
Task 1: Compare the Power Ratings
Compare the module’s power ratings with the values shown in the Hub Manager Status
display (Figure 2-3).
If any of the module's power requirements (1) exceed the values shown in the status
display (2) add another power supply (see the DEChub 900 MultiSwitch Owner’s
Manual).
Figure 2-3: Power Ratings
2
NPB-0715-96F
1
Available: 90.5 W
5V: 13.0 A, 15V: 3.5 A
25.6 W
4.1 A
5 V
260 MA 15 V
0.1 A
12 V
20.5 W
3.9 W
1.2 W
