AT Commands F-43
AT Commands
&P
n Dial Pulse Ratio
&P0
Make = 39%, Break = 61%.
&P1
Make = 33%, Break = 67%.
Controls the ratio of the off-hook (make) to on-hook (break) interval that the modem
uses for pulse dialing.
*P
n Remote Access Passwords
*P0
Sets Level 0 remote access password.
*P1
Sets Level 1 remote access password.
Allows you to set a password used to establish a remote access session.
NOTE
Important: Set all passwords before enabling security.
The *P command must be the last command on the command line. Both Level 0 and
Level 1 passwords are set to null at the factory.
The following prompts appear when you issue this command:
Passwords must contain exactly five alphanumeric characters. The modem ignores
upper case or lower case and parity. You must type the old password correctly in order
to enter a new password. You must type the new password the same way both times
for it to take effect. Periods echo on the terminal as you enter the passwords.
Prompt:
Response:
OLD PASSWORD:
Type the existing password for verification.
Press Enter. If a password has not been set, just
press Enter.
NEW PASSWORD:
Type a new password and press Enter
.
NEW PASSWORD:
For verification, type the new password and
press Enter again
