Using Menus to Configure the Module
4-4 Configuring the Module in a DEChub 900
Using Menus to Configure the Module
The following screen shows the options available from the
DECserver 900MC
INSTALLATION MENU
when the module is operating in a DEChub 900
configuration.
NOTE
When your module is installed in the DEChub 900, the slot number where the
module is installed appears at the top of the menu.
DECserver 900MC
===========================================================
DECserver 900MC INSTALLATION MENU
[1] Reset with Factory Defaults
[2] Reset with Current Settings
[3] Show Current Settings
[4] Configure IP
===========================================================
Enter selection: [n] <Return>
- slot 3
