Digi Connect EZ Mini, User Manual

Page: 6 / 659

Digi Connect EZ Mini User Guide 6
Configuration and management
Review Connect EZ default settings 37
Local WebUI 37
Digi Remote Manager 37
Default interface configuration 37
Other default configuration settings 37
Change the default password for the admin user 38
Configuration methods 39
Using Digi Remote Manager 41
Access Digi Remote Manager 41
Using the web interface 41
Log out of the web interface 42
Use the local REST API to configure the Connect EZ device 42
Use the GET method to return device configuration information 42
Use the POST method to modify device configuration parameters and list arrays 44
Use the DELETE method to remove items from a list array 45
Access the terminal screen from the web UI 46
Using the command line 47
Access the command line interface 47
Log in to the command line interface 47
Exit the command line interface 48
Interfaces
Wide Area Networks (WANs) 49
Wide Area Networks (WANs) 50
Configure WAN priority and default route metrics 50
Configure SureLink active recovery to detect WAN failures 52
Configure the device to reboot when a failure is detected 59
Disable SureLink 65
Configure a Wide Area Network (WAN) 69
Show WAN status and statistics 75
Delete a WAN 77
Show Surelink status and statistics 78
Show Surelink status for all interfaces 78
Show Surelink status for a specific interface 78
Show Surelink status for all IPsec tunnels 79
Show Surelink status for a specific IPsec tunnel 79
Show Surelink status for all OpenVPN clients 80
Show Surelink status for a specific OpenVPN client 80
Serial port
Default serial port configuration 82
Serial mode options 82
View serial port information 82
Default serial port configuration 82
Configure Login mode 83
Configure Remote Access mode 87
Configure Application mode 92
Configure RealPort mode 95
Install RealPort on a Windows computer 96
Configure the serial port for RealPort mode 97