User authentication
Authentication groups
Digi Connect EZ Mini User Guide
420
a. Enable captive portal access rights for users of this group by checking the box next to
Captive portal access
.
b. Click
Captive portals
to expand the
Captive portal
node.
c. For
Add Captive portal
, click
.
d. In the
Captive portal
dropdown, select a captive portal to which users of this group will
have access.
e. Click
again to add additional captive portals.
8. (Optional) Enable users that belong to this group to query the device for Nagios monitoring by
checking the box next to
Nagios access
.
9. (Optional) Enable users that belong to this group to access the Bluetooth scanning service by
checking the box next to
Bluetooth scanner access
.
10. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Use the
add auth group
command to add a new authentication. For example, to add a group
named
test
:
(config)> add auth group test
(config auth group test)>
4. Enable access rights for the group:
n
Admin access:
(config auth group test)> acl admin enable true
(config)>
n
Set the access level for Admin access:
(config)> auth group admin acl admin level
value
(config)>
where
value
is either:
l
full
: provides users of this group with the ability to manage the Connect EZ device
by using the WebUI or the Admin CLI.
