Digi Connect EZ Mini, User Manual

Page: 112 / 659

Serial port Show serial status and statistics
Digi Connect EZ Mini User Guide 112
2. Set the number of data bits used by the device to which you want to connect:
(config)>path-paramdatabits bits
(config)>
3. Set the type of parity used by the device to which you want to connect:
(config)>path-paramparity parity
(config)>
Allowed values are:
n
even
n
odd
n
none
The default is none .
4. Set the stop bits used by the device to which you want to connect:
(config)>path-paramstopbits bits
(config)>
9. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
10. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Show serial status and statistics
To show the status and statistics for the serial port:

WebUI
1. Log into the Connect EZ WebUI as a user with Admin access.
2. On the main menu, click Status
3. Under Connections , click Serial .

Command line
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. Use the show serial command:
> show serial