User authentication
Authentication groups
Digi Connect EZ Mini User Guide
422
7. (Optional) Enable users that belong to this group to access the Bluetooth scanning service:
(config)> auth group test acl bluetooth_scanner enable true
(config)>
8. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
9. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Delete an authentication group
By default, the Connect EZ device has two preconfigured authentication groups:
admin
and
serial
.
These groups cannot be deleted.
To delete an authentication group that you have created:
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
>
Groups
.
4. Click the menu icon
(...
) next to the group to be deleted and select
Delete
.
5. Click
Apply
to save the configuration and apply the change.
Command line
