Diagnostics
Analyze network traffic
Digi Connect EZ Mini User Guide
604
2. Type
scp
to use the Secure Copy program to copy the file to your PC:
> scp host
hostname-or-ip
user
username
remote
remote-path
local
local-
path
to remote
where:
n
hostname-or-ip
is the hostname or ip address of the remote host.
n
username
is the name of the user on the remote host.
n
remote-path
is the location on the remote host where the file will be copied.
n
local-path
is the path and filename on the Connect EZ device.
For example:
To download the traffic saved in the file
/etc/config/analyzer/eth0.pcpng
to a PC with the IP
192.168.210.2
, for a user named
maria
, to the
/home/maria
directory:
> scp host 192.168.210.2 user maria remote /home/maria local
/etc/config/analyzer/eth0.pcpng to remote
[email protected]'s password:
eth0.pcpng
100%
11KB 851.3KB/s
00:00
Clear captured data
To clear captured data traffic in RAM, use the
command:
Command line
1. Log into the Connect EZ command line as a user with Admin access.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. Type the following at the Admin CLI prompt:
> analyzer clear name
capture_filter
>
where
capture_filter
is the name of a packet capture configuration. See
capture for the network analyzer
for more information.
To determine available packet capture configurations, use the
?
:
> anaylzer clear name ?
name: Name of the capture filter to use.
Format:
test_capture
capture_ping
> anaylzer clear name
Note
You can remove data traffic saved to a file using the
command.
