Serial port
Configure UDP serial mode
Digi Connect EZ Mini User Guide
103
8. Expand
Data Framing Settings
.
a. Click
Enable
to enable the data framing feature.
b. For
Maximum Frame Count
, enter the maximum size of the packet. The default is
1024
.
c. For
Idle Time
, enter the length of time the device should wait before sending the packet.
d. For
End Pattern
, enter the end pattern. The packet is sent when this pattern is received
from the serial port.
e. Click
Strip End Pattern
if you want to remove the end pattern from the packet before it is
sent.
9. Expand
UDP Serial Settings
.
a. For
Local port
, enter the UDP port. The default is 4001 or serial port 1, 4002 for serial port
2, etc.
b. (Optional) For
Socket String ID
, enter a string that should be added at the beginning of
each packet.
c. For
Destinations
, you can configure the remote sites to which you want to send data. If
you do not specify any destinations, the Connect EZ sends new data from the last IP
address and port from which data was received. To add a destination:
i. Click
Add Destination
. A destination row is added.
ii. (Optional) For
Description
, enter a description of the destination.
iii. For
Hostname
, enter the host name or IP address of the remote site to which data
should be sent.
iv. For
Port
, enter the port number of the remote site to which data should be sent.
