User authentication
User authentication methods
Digi Connect EZ Mini User Guide
411
Authentication methods are attempted in the order they are listed until the first successful
authentication result is returned. This procedure describes how to add methods to various places in
the list.
1. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Add the new authentication method to the appropriate location in the list:
n
To determine the current list of authentication methods:
a. Log into the Connect EZ command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access
selection menu
. Type
admin
to access the Admin CLI.
b. At the command line, type
config
to enter configuration mode:
> config
(config)>
c. Use the
show auth method
command to display the current authentication
methods configuration:
(config)> show auth method
0 local
(config)>
n
To add the new authentication method to the beginning of the list, use the index value
of
0
to indicate that it should be added as the first method:
(config)> add auth method 0
auth_type
(config)>
where
auth_type
is one of
local
,
radius
,
tacacs+
, or
ldap
.
n
To add the new authentication method to the end of the list, use the index keyword
end
:
(config)> add auth method end
auth_type
(config)>
where
auth_type
is one of
local
,
radius
,
tacacs+
, or
ldap
.
n
To add the new authentication in another location in the list, use an index value to
indicate the appropriate position. For example:
(config)> add auth method 1
auth_type
(config)>
where
auth_type
is one of
local
,
radius
,
tacacs+
, or
ldap
.
