Central management
Configure Digi Remote Manager
Digi Connect EZ Mini User Guide
551
3. Click
Central management
.
The Central management configuration window is displayed.
Digi Remote Manager support is enabled by default. To disable, click
Enable central
management
.
4. (Optional) For
Service
, select either
Digi Remote Manager
or
Digi aView
. The default is
Digi
Remote Manager
.
5. (Optional) For
Management server
, type the URL for the central management server.
The default varies depending on firmware versions:
n
Firmware version 22.2.9.x and newer, the default is the edp12.devicecloud.com. This
server is for device-connectivity only, and uses enhanced security through certificate-
based communication. See
for further infomation.
n
Firmware prior to version 22.2.9.x, the default is the Digi Remote Manager server,
.
6. (Optional) For
Management port
, type the destination port for the remote cloud services
connection. The default is
3199
.
7. (Optional) For
Retry interval
, type the amount of time that the Connect EZ device should wait
before reattempting to connect to remote cloud services after being disconnected. The default
is 30 seconds.
Allowed values are any number of hours, minutes, or seconds, and take the format
number
{
h|m|s
}.
For example, to set
Retry interval
to ten minutes, enter
10m
or
600s
.
8. (Optional) For
Keep-alive interval
, type the amount of time that the Connect EZ device should
wait between sending keep-alive messages to remote cloud services when using a non-cellular
interface. The default is 60 seconds.
Allowed values are any number of hours, minutes, or seconds, and take the format
number
{
h|m|s
}.
For example, to set
Keep-alive interval
to ten minutes, enter
10m
or
600s
.
Note
The
Cellular keep-alive interval
is not used by the Connect EZ. Any entry is ignored.
9. (Optional) For
Allowed keep-alive misses
, type the number of allowed keep-alive misses. The
default is
3
.
