Services
Location information
Digi Connect EZ Mini User Guide
295
The
Configuration
window is displayed.
3. Click
Services
>
Location
>
Destination servers
.
4. For
Add destination server
, click
.
5. (Optional) For
Label
, type a description of the location destination server.
6. For
Destination server
, enter the hostname or IP address of the remote host to which location
messages will be sent.
7. For
Destination server port
, enter the UDP or TCP port on the remote host to which location
messages will be sent.
8. For
Communication protocol
, select either
UDP
or
TCP
.
9. For
Forward interval multiplier
, select the number of
Location update intervals
to wait
before forwarding location data to this server. See
Configure the location service
for more
information about setting the
Location update interval
.
10. For
NMEA filters
, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
n
To remove a filter:
a. Click the down arrow (
) next to the appropriate message type.
b. Click
Delete
.
n
To add a message type:
a. For
Add NMEA filter
or
Add TAIP filter
, click
.
b. Select the filter type. Allowed values are:
l
GGA
: Reports time, position, and fix related data.
l
GLL
: Reports position data: position fix, time of position fix, and status.
l
GSA
: Reports GPS DOP and active satellites.
l
GSV
: Reports the number of SVs in view, PRN, elevation, azimuth, and SNR.
l
RMC
: Reports position, velocity, and time.
l
VTG
: Reports direction and speed over ground.
11. For
TAIP filters
, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
n
To remove a filter:
a. Click the down arrow (
) next to the appropriate message type.
b. Click
Delete
.
n
To add a message type:
a. For
Add NMEA filter
or
Add TAIP filter
, click
.
b. Select the filter type. Allowed values are:
l
AL
: Reports altitude and vertical velocity.
l
CP
: Compact position: reports time, latitude, and longitude.
l
ID
: Reports the vehicle ID.
l
LN
: Long navigation: reports the latitude, longitude, and altitude, the horizontal
and vertical speed, and heading.
l
PV
: Position/velocity: reports the latitude, longitude, and heading.
