Get started with Connect EZ
Step 5: Configure RealPort from the Digi Navigator
Digi Connect EZ Mini User Guide
19
Step 5: Configure RealPort from the Digi Navigator
You can configure the Connect EZ to communicate with your computer using RealPort from the
. You must enable RealPort on the device and then configure your computer for RealPort.
In this step, all serial ports on the device are set to RealPort mode and the RealPort service is enabled.
The COM ports on your laptop are also configured.
Note
You can also configure the device to accept a Realport connection from the web UI on the
device. See
1. Make sure theConnect EZ is
powered on and connected to your network or computer
.
2.
the
Digi Navigator
.
3. Launch the
Digi Navigator
.
4. Select the device you want to configure using one of the following methods:
n
Specify a device
: Expand the
Specify a device
section and enter the IP address or host
name for the device.
n
Select a device
: From the list of devices shown in the
Digi Navigator
, expand the
device that you want to configure.
5. Configure RealPort on the device.
a. Click the
Configure device for RealPort
button. A login screen displays.
b. Enter the device's default user name and password in the appropriate fields. The default
user name is
admin
and the default password is the unique password printed on the label
packaged with your device.
c. Click
Submit
. A progress message displays.
d. When RealPort configuration is complete, the
Success
message displays.
e. Click
Close
to close the message.
6. Configure RealPort on your computer.
