Virtual Private Networks (VPN)
OpenVPN
Digi Connect EZ Mini User Guide
194
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
VPN
>
OpenVPN
>
Clients
.
4. Create a new OpenVPN client or select an existing one:
n
To create a new OpenVPN client, see
Configure an OpenVPN client by using an .ovpn file
or
Configure an OpenVPN client without using an .ovpn file
.
n
To edit an existing OpenVPN client, click to expand the appropriate client.
5. After creating or selecting the OpenVPN client, click
Active recovery
.
6.
Enable
active recovery.
7. For
Restart interface
, enable to configure the device to restart the interface when its
connection is considered to have failed. This is useful for interfaces that may regain
connectivity after restarting.
8. For
Reboot device
, enable to instruct the device to reboot when the WAN connection is
considered to have failed.
9. Change the
Interval
between connectivity tests.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take the
format
number
{
w|d|h|m|s
}.
For example, to set
Interval
to ten minutes, enter
10m
or
600s
.
The default is 15 minutes.
10. For
Success condition
, determine whether the interface should fail over based on the failure
of one of the test targets, or all of the test targets.
