Services
Configure SSH access
Digi Connect EZ Mini User Guide
264
n
To limit access to hosts connected through a specified interface on the Connect EZ
device:
(config)> add service ssh acl interface end
value
(config)>
Where
value
is an interface defined on your device.
Display a list of available interfaces:
Use
... network interface ?
to display interface information:
Repeat this step to list additional interfaces.
n
To limit access based on firewall zones:
(config)> add service ssh acl zone end
value
Where
value
is a firewall zone defined on your device, or the
any
keyword.
Display a list of available firewall zones:
Type
... firewall zone ?
at the config prompt:
(config)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config)>
Repeat this step to list additional firewall zones.
4. (Optional) Set the private key in PEM format. If not set, the device will use an automatically-
generated key.
(config)> service ssh key key.pem
(config)>
5. (Optional) Configure Multicast DNS (mDNS)
mDNS is a protocol that resolves host names in small networks that do not have a DNS server.
mDNS is enabled by default. To disable mDNS, or enable it if it has been disabled:
