User authentication
Authentication groups
Digi Connect EZ Mini User Guide
419
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
>
Groups
.
4. For
Add
, type a name for the group and click
.
The group configuration window is displayed.
5. Click the following options, as appropriate, to enable or disable access rights for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the
Access level
should be
Full access
or
Read-only access
.
where
value
is either:
l
Full access full
: provides users of this group with the ability to manage the Connect
EZ device by using the WebUI or the Admin CLI.
l
Read-only access read-only
: provides users of this group with read-only access to
the WebUI and Admin CLI.
The default is
Full access full
.
n
Shell access
Shell access is not available if the
Allow shell
parameter has been disabled. See
for more information about the
Allow shell
parameter.
n
Serial access
6. (Optional) Configure OpenVPN access. See for further information.
7. (Optional) Configure captive portal access:
