User authentication
Disable shell access
Digi Connect EZ Mini User Guide
459
8. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Disable shell access
To prohibit access to the shell prompt for all authentication groups, disable the
Allow shell
parameter.. This does not prevent access to the Admin CLI.
Note
If shell access is disabled, re-enabling it will erase the device's configuration and perform a
factory reset.
WebUI
1. Log into the Connect EZ WebUI as a user with full Admin access rights.
2. On the menu, click
System
. Under
Configuration
, click
Device Configuration
.
The
Configuration
window is displayed.
3. Click
Authentication
.
4. Click to disable
Allow shell
.
Note
If shell access is disabled, re-enabling it will erase the device's configuration and perform
a factory reset.
5. Click
Apply
to save the configuration and apply the change.
Command line
